Kia Soul: A/C Pressure Transducer Inspection - Air conditioning System - Heating,Ventilation And Air ConditioningKia Soul: A/C Pressure Transducer Inspection

Kia Soul 2014-2019 PS Service Manual / Heating,Ventilation And Air Conditioning / Air conditioning System / A/C Pressure Transducer Inspection

1.
Measure the pressure of high pressure line by measuring voltage output between terminal “1” and “2”.

2.
Inspect the voltage value whether it is sufficient to be regular value or not.

3.
If the measured voltage value is not wihtin specification, replace the A/C pressure transducer.

Voltage = 0.00878835 * Pressure + 0.4

    A/C Pressure Transducer Description
    The A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by o ...

    A/C Pressure Transducer Replacement
    1. Disconnect the negative (-) battery terminal. 2. Recover the refrigerant with a recovery/charging station. 3. ...

    See also:

    Rear Glass Defogger Switch  Installation
    1. Install the heater and A/C control unit. 2. Connect the negative (-) battery terminal. ...

    Front Hub / Knuckle Repair procedures
    Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from front hub. Tightening torque: 88.3 ~ ...

    Sound Mood Lamp Schematic Diagrams
    Circuit Diagram ...