Kia Soul: Windshield Wiper-Washer Switch
Inspection
Wiper Switch
Washer Switch
Removal
1. |
Remove the steering column shroud lower / upper panel.
(Refer to Body - "Steering Column Shroud Panel")
|
2. |
Disconnect the connector (A).
|
3. |
If necessary of removing the wiper & washer switch (A), release
the lock of wiper switch using tool without removing the steering
wheel and the clock spring.
|
4. |
Remove the steering wheel.
(Refer to Steering System - "Steering Wheel")
|
5. |
Remove the clock spring.
(Refer to Restraint - "Driver Airbag (DAB) Module and Clock
Spring")
|
6. |
Remove the multifunction switch assembly (A) after loosening
2 screws.
|
Installation
1. |
Install the multifunction switch after connecting the connector.
|
2. |
Install the clock spring and steering.
|
3. |
Install the upper and lower shroud.
|
4. |
Install the steering wheel.
|
Component Location
1. Windshield wiper arm & blade 2. Wiper & washer switch 3. Windshield washer hose 4. Windshield wiper motor & linkage 5. Washer motor 6. Wash ...Front Wiper Motor Component Location
1. Cap 2. Nut 3. Wiper arm & blade 4. Rivet 5. Cowl top cover 6. Bolt 7. Wiper motor & linkage assembly ...See also:
High Pressure Fuel Pump. Repair procedures
Removal
...
Identification Numbers
Identification Number Description
Vehicle Identification Number
1.
World Manufacturer Identifier (WMI)
- KNA : Passenger vehicle, MPV(Multipurpose Passen ...
Valve Body. Removal
1.
Remove the under cover.
(Refer to Engine Mechanical System - "Engine Room Under Cover")
2.
Remove the drain plug (A) and dr ...