Kia Soul: Vehicle stability management (VSM) - Brake system - Driving your vehicleKia Soul: Vehicle stability management (VSM)

Kia Soul 2009-2013 AM Owner's Manual / Driving your vehicle / Brake system / Vehicle stability management (VSM)

This system provides further enhancements to vehicle stability and steering responses when a vehicle is driving on a slippery road or a vehicle detected changes in coefficient of friction between right wheels and left wheels when braking.

VSM operation

When the VSM is in operation, ESC indicator light (blinks.) blinks.

When the vehicle stability management is operating properly, you can feel a slight pulsation in the vehicle. This is only the effect of brake control and indicates nothing unusual.

The VSM does not operate when:

  • Driving on bank road such as gradient or incline
  • Driving rearward
  • ESC OFF indicator light (on the instrument cluster) remains on the instrument cluster
  • EPS indicator light remains on the instrument cluster

VSM operation off

If you press the ESC OFF button to turn off the ESC, the VSM will also cancel and the ESC OFF indicator light (To turn on the VSM, press the button again. The ESC OFF indicator light goes) illuminates.

To turn on the VSM, press the button again. The ESC OFF indicator light goes out.

Malfunction indicator

The VSM can be deactivated even if you don’t cancel the VSM operation by pressing the ESC OFF button. It indicates that a malfunction has been detected somewhere in the Electric Power Steering system or VSM system. If the ESC indicator light (take your vehicle to an authorized Kia dealer and have the system checked.) or EPS warning light remains on, take your vehicle to an authorized Kia dealer and have the system checked.

  • The VSM is designed to function above approximately 9 mph (15 km/h) on curves.
  • The VSM is designed to function above approximately 18 mph (30 km/h) when a vehicle is braking on a split-mu road. The split-mu road is made of surfaces which have different friction forces.
  • The Vehicle Stability Management system is not a substitute for safe driving practices but a supplementary function only. It is the responsibility of the driver to always check the speed and the distance to the vehicle ahead. Always hold the steering wheel firmly while driving.
  • Your vehicle is designed to activate according to the driver’s intention, even with installed VSM. Always follow all the normal precautions for driving at safe speeds for the conditions – including driving inclement weather and on a slippery road.

WARNING - Tire/wheel sizes

When replacing tires and wheels, make sure they are the same size as the original tires and wheels installed. Driving with varying tire or wheel sizes may diminish any supplemental safety benefits of the VSM system.

    Hill-start assist control (HAC)
    Hill start Assist Control is a comfort function. The main intend is to prevent the vehicle from rolling backwards while driving off uphill on an inclined surface. HAC holds the braking pressure bu ...

    Good braking practices
    Check to be sure the parking brake is not engaged and the parking brake indicator light is out before driving away. Driving through water may get the brakes wet. They can also get wet when ...

    See also:

    Occupant detection system
    Type A Type B Your vehicle is equipped with an occupant detection system in the front passenger's seat. The occupant detection system is designed to detect the presence of a properly-seat ...

    Seat belt precautions
    Infant or small child All 50 states have child restraint laws. You should be aware of the specific requirements in your state. Child and/or infant seats must be properly placed and installed in t ...

    Adjustment
    Transaxle Control Module (TCM) Learning When shift shock is occurred or parts related with the transaxle are replaced, TCM learning should be performed. In the following cas ...