Kia Soul: Vehicle break-in process - IntroductionKia Soul: Vehicle break-in process

Kia Soul 2014-2019 PS Owner's Manual / Introduction / Vehicle break-in process

No special break-in period is needed. By following a few simple precautions for the first 600 miles (1,000 km) you may add to the performance, economy and life of your vehicle.

  • Do not race the engine.
  • While driving, keep your engine speed (rpm, or revolutions per minute) between 2,000 rpm and 4,000 rpm.
  • Do not maintain a single speed for long periods of time, either fast or slow.Varying engine speed is needed to properly break-in the engine.
  • Avoid hard stops, except in emergencies, to allow the brakes to seat properly.
  • Don't let the engine idle longer than 3 minutes at one time.
  • Don't tow a trailer during the first 1,200 miles (2,000 km) of operation.
    Vehicle handling instructions
    As with other vehicles of this type, failure to operate this vehicle correctly may result in loss of control, an accident or vehicle rollover. Specific design characteristics (higher ground clearanc ...

    Vehicle data collection and event data recorders
    This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road ...

    See also:

    Front Disc Brake. Removal
    Brake caliper assembly 1. Remove the front wheel & tire. Tightening torque : 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft ...

    Heater Unit Components
    [LH] 1. Foot shower left duct 2. Motor&Wheel assembly 3. Mode actuator motor assembly 4. Cam mode 5. Defroster door lever 6. Defroster door ARM 7. Ventila ...

    Engine
    ...