Kia Soul: Valve Body. Installation - Hydraulic System - Automatic Transaxle SystemKia Soul: Valve Body. Installation

Kia Soul 2014-2019 PS Service Manual / Automatic Transaxle System / Hydraulic System / Valve Body. Installation

1.
Install in the reverse order of removal.
  
•
Adding Automatic Transaxle Fluid(ATF).
(Refer to Hydraulic System - "Fluid")
•
Perform Transaxle Control Module(TCM) learning after replacing the valve body to prevent slow transaxle response, jerky acceleration and jerky startup.
(Refer to Automatic Transaxle Control System - "Repair procedures")
•
Use new valve body gasket (A).

    Valve Body. Removal
    1. Remove the under cover. (Refer to Engine Mechanical System - "Engine Room Under Cover") 2. Remove the drain plug (A) and dr ...

    See also:

    Antenna Coil Removal
    1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad ...

    Tire Installation
    1. Apply tire soap or lubrication to the top and bottom tire beads. 2. To fit the bottom bead, position the valve at the 5 o’clock pos ...

    Power Door Mirror Switch Circuit Diagram
    ...