Kia Soul: Transaxle Oil Temperature Sensor. Removal

1.	Change the shift lever to "N" range.

2.	Remove the valve body assembly. (Refer to Hydraulic System - "Valve Body")

3.	Disconnect the input & output speed sensor connector (A).

Loosen the main connctor bolt (B).

Tightening torque :

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

5.	Dissconnect the solenoid valve connector (A).

6.	Remove the solenoid valve connector clip (B) after loosening a bolt and then remove the connector by pushing down to it.

1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector (A). 3. Measure resistance bet ...

1. Install in the reverse order of removal. • ...