|
1. |
Install the timing chain cover.
|
(1) |
Before installing, remove the hardened sealant from the
cylinder block and ladder frame surface.
|
|
(2) |
Apply the liquid gasket(TB 1217H or LOCTITE 5900H) on
the surface between the cylinder head and the cylinder block.
Width :
3 ~ 5mm (0.1181~0.1969in.)
|
|
|
(3) |
Apply the liquid gasket, THREE BOND 1282B or THREE BOND
1216E on the water pump contact parts (A) of the timing chain
cover and THREE BOND 1217H or LOCTITE 5900H on the rest parts
(B).
Reassemble the cover within 5 minutes.
Width :
3.5 ~ 4.5 mm (0.1378 ~ 0.1772 in)
|
|
Remove oil or dust on the surface surely.
|
|
|
(4) |
Align the dowel pin of the cylinder block and the holes
of the oil pump.
|
|
(5) |
Tighten the bolts to install the timing chain cover (A).
Tightening torque
M8 bolts :
18.6 ~ 23.5 N.m (1.9 ~ 2.4 kgf.m, 13.7 ~ 17.4
lb-ft)
M6 bolts :
9.8 ~ 11.8 Nm (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
|
|
|
|
2. |
Install in the reverse order of removal.
|
•
Use fender covers to avoid damaging painted surfaces.
в ...
1. Timing chain
2. Timing chain guide
3. Timing chain arm
4. Timing chain auto tensioner
...
See also:
Floor mat anchor(s)
When using a floor mat on the front floor carpet, make sure it attaches to the
floor mat anchor(s) in your vehicle. This keeps the floor mat from sliding forward.
WARNING - After market floor mat ...
TPMS Sensor Mode of Operation
ASIC Mode
1.
Factory Mode
The factory mode is the mode that allows the TPM sensor to transmit
RF Frames and sample LF more often in the HKMC factory. T ...
Exhaust System Inspection
1.
Visually check the pipes, hangers and connections for severe corrosion,
leaks or damage.
2.
Check for unusal exhaust sounds or abnormal ...
Kia Soul: Timing Chain Cover Installation
Timing Chain Cover Removal
Timing Chain Components