Kia Soul: Thermostat Installation - Cooling System - Engine Mechanical SystemKia Soul: Thermostat Installation

Kia Soul 2014-2019 PS Service Manual / Engine Mechanical System / Cooling System / Thermostat Installation

1.
Place the thermostat in the block.
Install the thermostat (B) with the jiggle valve upward.
2.
Install the water inlet fitting (A).

Tightening torque :
18.6 ~ 23.5N.m (1.9 ~ 2.4kgf.m, 13.7 ~ 17.4lb-ft)

3.
Fill with engine coolant.
4.
Start engine and check for leaks.
    Thermostat Inspection
    1. Immerse the thermostat in water and gradually heat the water. 2. Check the valve opening temperature. Valv ...

    Thermostat Troubleshooting
    Symptoms Possible Causes Remedy Coolant leakage • From the thermostat gasket Check the mounting ...

    See also:

    Oil Pump Removal and Installation
    1. Remove the timing chain cover. (Refer to Timing System - "Timing Chain Cover") 2. Remove the pump cover (A). ...

    Air Ventilation Seat Control Unit Removal
    Cushion Blower 1. Remove the front seat assembly. (Refer to Body - "Front Seat Assembly") 2. Remove th ...

    Removal
    1. Remove the transaxle assembly. G 1.6 GDI (Refer to Manual Transaxle System - " Manual Transaxle") G 2.0 GDI (Refer to Manual Transaxle System - &qu ...