Kia Soul: Tail Gate Latch Replacement - Tail Gate - Body (Interior and Exterior)Kia Soul: Tail Gate Latch Replacement

Kia Soul 2014-2019 PS Service Manual / Body (Interior and Exterior) / Tail Gate / Tail Gate Latch Replacement

  
•
Put on gloves to protect your hands.
  
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Take care not to scratch the body surface.
1.
Remove the tail gate trim.
(Refer to Tail Gate - "Tail Gate Trim")
2.
After loosening the mounting bolts, then remove the tail gate latch assembly (A).
Tightening torque :
6.9~10.8 N.m (0.7~1.1 kgf.m, 5.1~8.0 lb-ft)

3.
Disconnect the tail gate latch connector (A).
4.
Install in the reverse order of removal.
  
•
Make sure the tail gate locks/unlocks and opens/closes properly.
•
Adjust the tail gate alignment.
•
Make sure the connectors are connected in properly.
    Tail Gate Latch Component Location
    1. Tail gate latch assembly ...

    Tail Gate Back Panel Component Location
    1. Tail gate back panel ...

    See also:

    Owner maintenance precautions
    Improper or incomplete service may result in problems. This section gives instructions only for the maintenance items that are easy to perform. As explained earlier in this section, several procedu ...

    Special Service Tools
    Tool Name / Number Illustration Description Disc & hub assembly bolt remover 09977-3R000 Used for removing / installing disc & hub a ...

    Warnings and indicators
    All warning lights are checked by turning the ignition switch ON (do not start the engine). Any light that does not illuminate should be checked by an authorized Kia dealer. After starting the en ...