Kia Soul: Starter Relay Inspection
Kia Soul 2014-2019 PS Service Manual / Engine Electrical System / Starting System / Starter Relay Inspection
1. |
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
|
2. |
Remove the fuse box cover.
|
3. |
Remove the starter relay (A).
|
4. |
Check for continuity between the terminals (30 and 87) using an
ohmmeter.
|
5. |
Apply 12V to the terminal 85 and ground to the terminal 86 and
then check for continuity between the terminals (30 and 87).
|
6. |
Install the starter relay.
|
7. |
Install the fuse box cover.
|
Starter Cleaning
1. Do not immerse parts in cleaning solvent. Immersing the yoke assembly and/or armature will damage the insulation wipe these parts with a cloth only. ...See also:
Tire pressure monitoring system (TPMS)
Low tire pressure telltale / TPMS malfunction indicator
Each tire, including the spare (if provided), should be checked monthly when
cold and inflated to the inflation pressure recommended by the ...
Engine temperature gauge
This gauge shows the temperature of the engine coolant when the ignition switch
is ON.
Do not continue driving with an overheated engine. If your vehicle overheats,
refer to “If the engine ov ...
Automatic climate control system
Type A
1. Temperature control button
2. AUTO (automatic control) button
3. Air conditioning button
4. Air intake control button
5. A/C display
6. OFF button
7. Front windshield defroster butt ...