Kia Soul: SRS Control Module (SRSCM). Installation
1. |
Remove the ignition key from the vehicle.
|
2. |
Disconnect the battery negative cable and wait for at least three
minutes before beginning work.
|
3. |
Install the SRSCM with the SRSCM mounting bolts.
|
4. |
Connect the SRSCM harness connector.
|
5. |
Install the rear heating joint duct.
|
6. |
Install the floor console.
(Refer to Body - "Floor console")
|
7. |
Reconnect the battery negative cable.
|
8. |
After installing the SRSCM, confirm proper system operation:
|
SRSCM is sensing the vehicle rollover. SAB, CAB, BPT will be able
to expanse if mechanic moves the SRSCM on vehicle during IGN ON state.
For this reason, turn the IGN OFF surely and then remove the SRSCM from
vehicle.
|
SRS Control Module (SRSCM). Removal
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning ...SRS Control Module (SRSCM). Variant coding
After replacing the SRSCM with a new one, MUST perform the “Variant Coding” procedure. 1. ...See also:
Cargo weight
This figure includes all weight added to the Base Curb Weight, including cargo
and optional equipment. ...
Operation
Passive Functions
The system allows the user to access the vehicle without having to
perform any actions (e.g. RKE button pressing) with the SMART KEY FOB. It
is sufficient that a va ...
Specification
Air Conditioner
Item
Specification
Compressor
Type
6VSX14 (External Variable Displacement Swash Plate)
Oil type & Capacity
PAG (FD4 ...