Kia Soul: Side repeater light bulb Type A replacement
1. Remove the light assembly from the vehicle by prying the lens and pulling
the assembly out.
2. Disconnect the bulb electrical connector.
3. Separate the socket and the lens parts by turning the socket counterclockwise
until the tabs on the socket align with the slots on the lens part.
4. Remove the bulb by pulling it straight out.
5. Insert a new bulb in the socket.
6. Reassemble the socket and the lens part.
7. Connect the bulb electrical connector.
8. Reinstall the light assembly to the body of the vehicle.
Headlight, position light, turn signal light, side marker light and front fog
light bulb replacement
(1) Headlight (High)
(2) Headlight (Low)
(3) Front side marker light
(4) Front turn signal/Position light
(5) Front fog light (if equipped)
If the headlight aiming adjustment is necessary after ...
Side repeater light bulb Type B replacement
If the light bulb is not operating, have the vehicle checked by an authorized
Kia dealer. ...
See also:
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
1.This device may not cause harmful interference, and
2.This device must accept any interference received, including interference that
may cau ...
Components
1. Clutch pedal assembly
2. Ignition lock and clutch switch
3. Master cylinder
4. Clutch tube
...
Manifold Absolute Pressure Sensor (MAPS). Description and Operation
Description
Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor
and is installed on the surge tank. It senses absolute pressure of the surge
tank and transfers the analog ...