Kia Soul: Shift Cable. Installation - Automatic Transaxle Control System - Automatic Transaxle SystemKia Soul: Shift Cable. Installation

Kia Soul 2014-2019 PS Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Shift Cable. Installation

1.
Install in the reverse order of removal.
  
•
Install the cable after placing the shift lever and the transaxle manual control lever in the N position.
    Shift Cable. Removal
    1. Remove the floor console assembly. (Refer to Body - "Floor Console") 2. Remove the rear heating joint duct (A). ...

    Automatic Transaxle
    ...

    See also:

    Checking the engine oil level
    1. Be sure the vehicle is on level ground. 2. Start the engine and allow it to reach normal operating temperature. 3. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil ...

    Instrument Cluster Installation
    1. Connect the cluster connector. 2. Install the cluster assembly. 3. Install the clu ...

    Mode Control Actuator Description
    The mode control actuator is located at the heater unit. It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. Pressing ...