Kia Soul: Removal - Clutch Release Cylinder - Clutch SystemKia Soul: Removal

Kia Soul 2014-2019 PS Service Manual / Clutch System / Clutch Release Cylinder / Removal

1.
Drain the brake fluid through the bleed plug (A).
  
Do not spill brake fluid on the vehicle; it may damage the paint if brake fluid does contact the paint, wash it off immediately with water.

2.
Remove the clutch release cylinder assembly (C) after removing the tube (B) and bolts (A-2ea).

Tightening torque:
14.7 ~ 21.6 N.m (1.5 ~ 2.2 kgf.m,10.8 ~ 15.9 lb-ft)

    Inspection
    1. Check the clutch release cylinder for fluid leakage. 2. Check the clutch release cylinder boot for damage. ...

    Installation
    1. Install in the reverse order of removal.    Apply the specified grease to ...

    See also:

    Check tire pressure
    You can check the tire pressure in the assist mode on the cluster. - Refer to “LCD mode” on page 4-54. Tire pressure is displayed 1~2 minutes later after driving. If tire pressure is not ...

    Drive Belt Adjustment
    Drive belt tension measurement and adjustment Belt tension measurement Measure the belt tension using a mechanical tension gauge or a sonic tension meter. Tensi ...

    Registering your vehicle in a foreign country
    If you plan to register your vehicle in a foreign country, you should confirm that it conforms to the regulations in that country. Even if you successfully register the vehicle in a foreign countr ...