Kia Soul: Removal
1. |
Remove the air cleaner assembly.
G 1.6 GDI (Refer to Engine Mechanical System - "Air Cleaner")
G 2.0 GDI (Refer to Engine Mechanical System - "Air Cleaner")
|
2. |
Remove the battery & tray.
G 1.6 GDI (Refer to Engine Electrical System - "Battery")
G 2.0 GDI (Refer to Engine Electrical System - "Battery")
|
3. |
Disconnect the clutch tube (B) and reservoir hose (A) from the
clutch master cylinder.
|
4. |
Loosen the clutch tube bracket bolts (A).
|
5. |
Remove the clutch tube (A) after removing the release cylinder
assembly (B).
|
Components
1. Clutch pedal assembly 2. Ignition lock and clutch switch 3. Master cylinder 4. Clutch tube ...Installation
When installing, O-rings of clutch tube should be replaced with a new one. 1. Install i ...See also:
Fuel Tank Pressure Sensor (FTPS). Specifications
Specification
Pressure [kPa (kgf/cm²,
in H2O)
Output Voltage (V)
-6.67 (-0.068, -26.8)
0.5
0
2.5
+6.67 (0.068, 26.8)
...
ISG system malfunction
The system may not operate when:
If the ISG related sensors or system error occurs, the yellow AUTO STOP indicator
()
on the instrument cluster will stay on after blinking for 5 seconds and t ...
Rear Door Side Weatherstrip Replacement
1.
Loosen the rear door checker (B) mounting bolt.
Tightening torque :
16.7 ~ 21.6 N.m (1.7 ~ 2.2 kgf.m, 12.3 ~ 15.9 lb-ft)
...