Kia Soul: Removal
| 1. |
Disconnect the battery (-) cable.
|
| 2. |
Disconnect the ignition lock switch and clutch switch connector
(A).
|
| 3. |
Separate the push rod (C) after remove the pin (A) and washer
(B).
|
| 4. |
Remove the clutch pedal mounting nuts (A).
|
Components
1. Clutch pedal assembly
2. Ignition lock and clutch switch
3. Master cylinder
4. Clutch tube
...
Installation
1.
Install in the reverse order of removal.
...
See also:
Loss of the smart key
A maximum of 2 smart keys can be registered to a single vehicle.
If you happen to lose your smart key, you will not be able to start the engine.
You should immediately take the vehicle and remainin ...
Intake Actuator Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the glove box housing.
(Refer to Body - "Glove Box Housing")
...
Overdrive Clutch Control Solenoid Valve(OD/C_VFS). Description
Overdrive clutch control solenoid valve(OD/C) is attached to the valve
body. This variable force solenoid valve directly controls the hydraulic pressure
inside the overdrive clutch.
...