Kia Soul: Removal
1. |
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
|
2. |
Disconnect the ignition lock switch connector (A).
|
3. |
Remove the ignition lock and clutch switch (B).
|
Inspection
Signal Circuit Inspection 1. Check ignition lock switch pull-up voltage (1) IG KEY "OFF", ENGINE "OFF". ...Installation
1. Install in the reverse order of removal. (1) Tighten the nut with the specified torque. Tightening ...See also:
Exterior features
Mounting bracket for roof carrier (if equipped)
To install or remove a roof carrier, you can use the mounting bracket and cover on the roof.
When you install a roof carrier, do the following proc ...
Manual transaxle shift indicator
Type A
Type B
This indicator informs you which gear is desired while driving to save fuel.
For example
: Indicates that shifting up to the
3rd gear is desired (currently the shift lever is i ...
Tachometer
The tachometer indicates the approximate number of engine revolutions per minute
(rpm).
Use the tachometer to select the correct shift points and to prevent lugging
and/or over-revving the engi ...