Kia Soul: Relay Box (Engine Compartment) Inspection
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Pull out the relay from the engine compartment relay box.
|
|
1. |
There should be continuity between the No.30 and No.87 terminals
when power and ground are connected to the No.85 and No.86 terminals.
|
2. |
There should be no continuity between the No.30 and No.87
terminals when power is disconnected.
|
1. |
There should be continuity between the No.30 and No.87 terminals
when power and ground are connected to the No.85 and No.86 terminals.
|
2. |
There should be no continuity between the No.30 and No.87
terminals when power is disconnected.
|
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Loosen the mounting nut (A) and bolt (B).
|
3. |
Reomve the engine room fuse & relay box from the hole (A).
|
4. |
Separate the engine room upper box (A) and lower cover (B).
|
5. |
Remove the wire cover (A) on the engine room lower box.
|
6. |
Disconnect the connectors (A) from the EMS box.
|
1. |
Be sure there is no play in the fuse holders, and that the
fuses are held securely.
|
2. |
Are the fuse capacities for each circuit correct?
|
3. |
Are there any blown fuses?
If a fuse is to be replaced, be sure to use a new fuse of
the same capacity. Always determine why the fuse blew first and
completely eliminate the problem before installing a new fuse.
|
|
See also:
Rear Seat Belt Retractor Replacement
•
When installing the belt, make sure not to damage the
retractor.
...
Recommended lubricants and capacities
To help achieve proper engine and powertrain performance and durability, use
only lubricants of the proper quality. The correct lubricants also help promote
engine efficiency that results in impro ...
Instrument Cluster Installation
1.
Connect the cluster connector.
2.
Install the cluster assembly.
3.
Install the clu ...