Kia Soul: Rear Wiper Motor Installation - Rear Wiper/Washer - Body Electrical SystemKia Soul: Rear Wiper Motor Installation

Kia Soul 2014-2019 PS Service Manual / Body Electrical System / Rear Wiper/Washer / Rear Wiper Motor Installation

1.
Install the rear wiper motor assembly.
Tightening torque Bolt :
6.9~10.8 Nm (0.7~1.1 kgf.m, 5.1~8.0 lbf.ft)
2.
Install the tailgate trim.
3.
Install the rear wiper arm cap after tighting the nut.
Tightening torque Nut :
3.9~6.9 N.m (0.4~0.7 kgf.m, 2.9~5.1 lbf.ft)
4.
Set the rear wiper blade and to the lowest defogger heat line and tailgate glass.
A : Auto stop position
    Rear Wiper Motor Removal
    1. Detach the rear wiper cap (A). 2. Remove the rear wiper arm & blade (B) after removing rear wiper HEX nut ...

    Rear Washer Switch Inspection
    1. Check for continuity between the terminals while operating the wiper and washer switch. If it is not normal condition, replace wiper and wiper switch. ...

    See also:

    Anti-lock brake system (ABS)
    ABS (or ESC) will not prevent accidents due to improper or dangerous driving maneuvers. Even though vehicle control is improved during emergency braking, always maintain a safe distance between yo ...

    Rear Glass Removal
       • In order to remove the rear glass, use the tools shown in the following figure: ...

    Tail Gate Back Panel Component Location
    1. Tail gate back panel ...