•
|
Put on gloves to protect your hands.
|
|
•
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
•
|
Take care not to scratch the body surface.
|
|
2. |
After loosening the mounting clips and screws, then remove the
rear wheel guard (A).
|
3. |
Install in the reverse order of removal.
• |
Replace any damaged clips.
|
|
|
•
Put on gloves to protect your hands.
...
•
Put on gloves to protect your hands.
...
See also:
Tire Removal
•
Using tires and wheel other than the recommended sizes
could cause unusual handling ...
Tilting the sunroof
To open the sunroof (autotilt feature), push the sunroof control lever upward
to the second detent. The sunroof will tilt all the way open. To stop the sunroof
tilting at any point, operate the ...
Trip A/B
Tripmeter (1)
The tripmeter is the total driving distance since the last tripmeter reset.
- Distance range: 0.0 ~ 9999.9 mi. or km
To reset the tripmeter, press the RESET/
button on the ste ...