| •
|
Put on gloves to protect your hands.
|
|
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
| •
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
| •
|
Take care not to bend or scratch the trim and panels.
|
|
|
1. |
Remove the rear seat back cover [LH]or [RH].
(Refer to Rear Seat - "Rear Seat Back Cover")
|
|
2. |
After loosening the mounting bolts, then remove the rear seat
latch (A).
Tightening torque :
19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m, 14.5 ~ 21.7 lb-ft)
|
|
|
3. |
Remove the rear seat latch rod (A) to direction of the arrow.
|
|
4. |
Install in the reverse order of removal.
|
1. Rear seat latch assembly
...
1. Rear seat folding lever
...
See also:
Ashtray
To use the ashtray, open the cover.
To clean or empty the ashtray, pull it out. Do not use the vehicle’s ashtrays
as waste receptacles.
WARNING - Ashtray use
Putting lit cigarettes or matches ...
License plate light bulb replacement
1. Remove the lens by pressing the tabs.
2. Remove the socket from the lens.
3. Remove the bulb by turning it counter clockwise.
4. Install a new bulb in the socket and install the socket to the ...
Manual transaxle oil Replacement
1.
Remove the engine room under cover.
(Refer to Engine Mechanical System - "Engine Room Under Cover")
2.
Drain the manual tra ...
Kia Soul: Rear Seat Latch Replacement
Rear Seat Latch Component Location
Rear Seat Folding Lever Component Location