Kia Soul: Rear Hub - Carrier Replacement
Kia Soul 2014-2019 PS Service Manual / Driveshaft and axle / Rear Axle Assembly / Rear Hub - Carrier Replacement
1. |
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
|
2. |
Remove the rear wheel and tire (A) from rear hub.
|
3. |
Remove the parking brake line.
Remove the parking brake cable (A), after removing the clip (B).
|
4. |
Loosen the guide rod bolt (B) and the remove the rear caliper
body (A).
|
5. |
Remove the pads (B), in the caliper carrier (A).
|
6. |
Remove the brake caliper mounting bolts (B), and then place the
brake caliper assembly (A) with wire.
|
7. |
Disconnect the wheel speed sensor connector (A).
|
8. |
Loosen the screws (B), and then remove the brake disc (A).
|
9. |
Loosen the bolts and then remove the hub bearing (A).
|
10. |
Remove the hub bearing by using the rubber hammer.
|
11. |
Install in the reverse order of removal.
|
Rear Hub - Carrier Components
1. Rear dust cover 2. Rear wheel hub assembly 3. Rear brake disc ...Rear Hub - Carrier Inspection
1. Check the hub for cracks and the splines for wear. 2. Check the brake disc for scoring and damage. 3. Check ...See also:
Inspection
W/Harness Inspection
1.
Check the vehicle speed sensor by using the scan tool.
(if normal, current vehicle speed is display)
2.
Chec ...
Specifications
Description
Specifications
Limit
General
Type
In-line, DOHC
Number of cylinders
4
...
Tail Gate Trim Component Location
1. Tail gate trim
...