| •
|
Put on gloves to protect your hands.
|
|
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
| •
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
| •
|
Take care not to bend or scratch the trim and panels.
|
|
|
1. |
Remove the floor console assembly.
(Refer to Floor Console - "Floor Console Assembly")
|
|
2. |
Loosen the rear console cover mounting screws (A).
|
|
3. |
Using a screwdriver or remover, remove the rear console cover
(A).
|
|
4. |
Install in the reverse order of removal.
|
• |
Make sure the connector is connected properly.
|
|
• |
Replace any damaged clips.
|
|
|
1. Rear console cover
...
See also:
Cooling Fan Specifications
Item
Specification
Motor capacity (W)
140 (With A/C)
120 (Without A/C)
Fan type
Puller
Puller
Fan speed control
...
Replacement
1.
Remove the cap (A) and remove the nuts, then remove the wiper
arm (B).
Tightening torque :
22.6 ~ 26.5 N.m(2.3 ~ 2.7 kgf.m, 16.6 ~ ...
Rear Wiper Motor Inspection
Rear Wiper Motor
1.
Remove the connector from the rear wiper motor.
2.
Connect battery positive (+) and negative (-) cable ...
Kia Soul: Rear Console Cover Replacement
Rear Console Cover Component Location
Console Armrest Component Location