Kia Soul: Purge Control Solenoid Valve (PCSV). Repair procedures - Engine Control System - Engine Control / Fuel SystemKia Soul: Purge Control Solenoid Valve (PCSV). Repair procedures

Kia Soul 2014-2019 PS Service Manual / Engine Control / Fuel System / Engine Control System / Purge Control Solenoid Valve (PCSV). Repair procedures

Inspection

1.
Turn the ignition switch OFF.
2.
Disconnect the PCSV connector.
3.
Measure resistance between the PCSV terminals 1 and 2.
4.
Check that the resistance is within the specification.
Specification: Refer to “Specification”

Removal

1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the purge control solenoid valve connector (A).
3.
Disconnect the vapor hoses (B) from the purge control solenoid valve.
4.
Remove the purge control solenoid valve (C).

Installation

  
•
Install the component with the specified torques.
•
Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
  
•
Use care to keep foreign material out of the valve.
1.
Install in the reverse order of removal.
    Purge Control Solenoid Valve (PCSV). Schematic Diagrams
    Circuit Diagram (M/T) (A/T) ...

    CVVT Oil Control Valve (OCV). Description and Operation
    Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated ...

    See also:

    Timing Chain Cover Installation
    1. Install the timing chain cover. (1) Before installing, remove the hardened sealant from the cylinder block and ladder frame surfa ...

    Seat Heater (Non-Air Ventilation) Components
    ...

    Front Disc Brake. Inspection
    Front brake disc thickness check 1. Check the brake pads for wear and fade. 2. Check the brake disc for damage and cracks. ...