Kia Soul: Power Door Lock Switch Removal
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the front door trim.
(Refer to Body - "Front Door Trim")
|
3. |
Remove the power window switch assembly (A) loosening the
mounting screws (8EA).
|
4. |
Remove the power window switch (A) after loosening the mounting
screws (4EA).
|
Power Door Lock Switch Diagnosis With GDS
1. The BCM can be diagnosed by using the GDS. The BCM communicates with the GDS which then displays inputs and outputs along with codes. It will be able to ...Power Door Lock Switch Installation
1. Install the power window switch assembly. 2. Install the front door trim after connect the connector. ...See also:
Registering your vehicle in a foreign country
If you plan to register your vehicle in a foreign country, you should confirm
that it conforms to the regulations in that country. Even if you successfully register
the vehicle in a foreign countr ...
Cowl Cross Bar Assembly Replacement
•
Put on gloves to protect your hands.
...
Checking the tire inflation pressure
1.After driving approximately 4 ~6miles(7~10km or about 10min), stop at a safety
location.
2.Connect connection hose (9) of the compressor directly to the tire valve.
3.Plug the compressor power c ...