Kia Soul: Power Door Lock Actuators Inspection
Kia Soul 2014-2019 PS Service Manual / Body Electrical System / Power Door Locks / Power Door Lock Actuators Inspection
Front Door Lock Module Inspection
| 1. |
Remove the front door trim.
(Refer to Body - "Front Door Trim")
|
| 2. |
Remove the front door module.
(Refer to Body - "Front Door Module")
|
| 3. |
Disconnect the connectors from the actuator.
|
| 4. |
Check actuator operation by connecting power and ground according
to the table. To prevent damage to the actuator, apply battery voltage
only momentarily.
|
| 5. |
Check for continuity between the terminals in each switch
position according to the table.
|
Rear Door Lock Module Inspection
| 1. |
Remove the rear door trim.
(Refer to Body - "Rear Door Trim")
|
| 2. |
Remove the rear door module.
(Refer to Body - "Rear Door Module")
|
| 3. |
Disconnect the connectors from the actuator.
|
| 4. |
Check actuator operation by connecting power and ground according
to the table. To prevent damage to the actuator, apply battery voltage
only momentarily.
|
| 5. |
Check for continuity between the terminals in each switch
position according to the table.
|
Tailgate Lock Module Inspection
| 1. |
Remove the tailgate trim.
(Refer to Body - "Tailgate Trim")
|
| 2. |
Disconnect the 4P connector from the actuator.
|
| 3. |
Check actuator operation by connecting power and ground according
to the table. To prevent damage to the actuator, apply battery voltage
only momentarily.
|
Tailgate Open Switch
| 1. |
Remove the tailgate trim.
(Refer to Body - "Tailgate Trim")
|
| 2. |
Disconnect the connector from the actuator.
|
| 3. |
Check for continuity between the terminals in each switch
position according to the table.
|
Hood Switch
| 1. |
Disconnect the connector (A) and bolts from the hood switch.
|
| 2. |
Check for continuity between the terminals and ground according
to the table.
|
Component Location
1. Driver power window main switch
2. BCM (Body Control Module)
3. Door lock switch
4. Front door lock actuator & switch
5. Rear door lock actuator & ...
Power Door Lock Switch Diagnosis With GDS
1.
The BCM can be diagnosed by using the GDS. The BCM communicates
with the GDS which then displays inputs and outputs along with codes.
It will be able to ...
See also:
Rear Wheel Speed Sensor. Components
1. Rear wheel speed sensor
2. Extension cable assembly
...
Cluster Ionizer (FATC only) Description
The cluster ionizer makes disinfection and decomposition of bad smell
from the air-conditioner or inflow air. And it cleans the inside air of a vehicle.
When the ignition switch is ON, the i ...
Output Speed Sensor. Description
The output speed sensor is a vital unit that measures the rate of rotation
of the transaxle's turbine shaft and output shaft, and delivers the readings
to the TCM. The sensor provides cri ...