Kia Soul: Parking Brake Cable. Installation - Parking Brake System - Brake SystemKia Soul: Parking Brake Cable. Installation

Kia Soul 2014-2019 PS Service Manual / Brake System / Parking Brake System / Parking Brake Cable. Installation

1.
Install the parking brake cable (A).
Tightening torque :
19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m, 14.5 ~ 21.7 lb-ft)

2.
Install the parking brake cable (A), and then install the clip (B).
3.
Install the parking brake cable (B).
4.
Install the parking brake cable adjuster, then adjust the parking brake lever stroke by turning adjusting nut (A).
Parking brake lever stroke:
5 ~ 7 clicks (Pull the lever with 196N (20 kgf, 44 lbf))

5.
Release the parking brake lever fully, and check that parking brakes do not drag when the rear wheels are turned. Readjust if necessary.
6.
Make sure that the parking brakes are fully applied when the parking brake lever is pulled up fully.
7.
Install the rear console cover (A).

8.
Install the rear tire and wheel.
Tightening torque :
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
    Parking Brake Cable. Removal
       The parking brake cables must not be bent or distorted. This will lead to stiff operation and premature failure. ...

    Parking Brake Cable. Adjustment
    Parking Brake Lever Stroke Adjustment 1. Remove the rear console cover (A). 2. Apply the brake pedal 20 times with the force of 10kg ...

    See also:

    Auto start
    To restart the engine from idle stop mode Release the brake pedal. or Move the shift gear to the R (Reverse) position or the sports mode while depressing the brake pedal. The engine will s ...

    Engine And Transmission Assembly Removal
       • Use fender covers to avoid damaging painted surfaces. в ...

    Front Seat Shield Outer Cover Replacement
       • Put on gloves to protect your hands. ...