Kia Soul: Output Speed Sensor. Removal - Automatic Transaxle Control System - Automatic Transaxle SystemKia Soul: Output Speed Sensor. Removal

Kia Soul 2014-2019 PS Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Output Speed Sensor. Removal

1.
Remove the valve body assembly.
(Refer to Hydraulic System - "Valve Body")
2.
Disconnect the input & output speed sensor connector(A).
3.
Remove the input & output speed sensor (B) after removing the bolts(2ea).
Tightening torque:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

    Output Speed Sensor. Inspection
    1. Check signal waveform of Input & output speed sensor using the GDS. Specification: Refer to "Signal Wave Form" section. ...

    Output Speed Sensor. Installation
    1. Install in the reverse order of removal.    • ...

    See also:

    Rear Bumper Cover Component Location
    1. Rear bumper cover ...

    Replacement
       • Be careful not to damage the fender and body. ...

    All Random
    Press the   key Set [ A.RDM] through the TUNE knob or key to randomly play all songs within the USB. ❈ Press A.RDM again to turn off. ...