Kia Soul: Oil Pressure Switch Removal and Installation
Kia Soul 2014-2019 PS Service Manual / Engine Mechanical System / Lubrication System / Oil Pressure Switch Removal and Installation
1. |
Remove the under cover.
|
2. |
Remove the oil drain plug, and drain the oil into a container.
|
3. |
Remove the oil pressure switch(A).
|
4. |
Install in the reverse order of removal
|
When installing the oil pressure switch, apply seal lock to the
thread.
|
Oil Pump Removal and Installation
1. Remove the timing chain cover. (Refer to Timing System - "Timing Chain Cover") 2. Remove the pump cover (A). ...Oil Pressure Switch
1. Check the continuity between the terminal and the body with an ohmmeter. If there is no continuity, replace the oil pressure switch. ...See also:
Dynamic Damper Installation
1.
Apply soap powder on the shaft to prevent being damaged between
the shaft spline and the dynamic damper.
2.
Install the dynamic damper.
...
ISG (Idle stop and go) system
Your vehicle may be equipped with the ISG system, which reduces fuel consumption
by automatically shutting down the engine, when the vehicle is at a standstill.
(For example : red light, stop sign ...
Use approved window washer anti-freeze in system
To keep the water in the window washer system from freezing, add an approved
window washer anti-freeze solution in accordance with instructions on the container.
Window washer anti-freeze is avail ...