Kia Soul: Mode selection
The mode selection button controls the direction of the air flow through the ventilation system.
Air can be directed to the floor, dashboard outlets, or windshield. Five symbols are used to represent.
Vent mode (B, D)
Air flow is directed toward the upper body and face. Additionally, each outlet can be controlled to direct the air discharged from the outlet.
Vent-Floor mode (B, D, C, E)
Air flow is directed towards the face and the floor.
Floor mode (C, E, A, D)
Most of the air flow is directed to the floor, with a small amount of the air being directed to the windshield and side window defrosters.
Floor/Defrost mode (A, C, E, D)
Most of the air flow is directed to the floor and the windshield with a small amount directed to the side window defrosters.
Defrost mode (A, D)
Most of the air flow is directed to the windshield with a small amount of air directed to the side window defrosters.
Instrument panel vents
The outlet vents can be opened or closed separately using the thumbwheel.
Also, you can adjust the direction of air delivery from these vents using the vent control lever as shown.
Heating and air conditioning
1. Start the engine.
2. Set the mode to the desired position. For improving the effectiveness of heating
and cooling;
- Heating:
- Cooling:
3. Set the temperature control to the desired posi ...
Temperature control
The temperature control knob allows you to control the temperature of the air
flow from the ventilation system. To change the air temperature in the passenger
compartment, turn the knob to the r ...
See also:
Rear Wiper Motor Removal
1.
Detach the rear wiper cap (A).
2.
Remove the rear wiper arm & blade (B) after removing rear
wiper HEX nut ...
Air bag warning label
Air bag warning labels, some required by the U.S. National Highway Traffic Safety
Administration (NHTSA), are attached to alert the driver and passengers of potential
risks of the air bag syst ...
Special Service Tools
Tool Name / Number
Illustration
Description
Alternator pulley remover wrench
(09373-27000)
Removal and installation of alternator pulley
...