Kia Soul: Master Cylinder. Installation
Master Cylinder assembly
1. |
Install in the reverse order of removal.
|
2. |
After installing, bleed the brake system.
(Refer to Brake system bleeding)
|
3. |
After be equipped perform bleeding air procedure in clutch release
cylinder after pouring the brake fluid.
(Refer to Clutch - "Clutch Release Cylinder") - [MT only]
|
Master Cylinder Reservoir
1. |
Install in the reverse order of removal.
|
2. |
After installing, bleed the brake system.
(Refer to Brake system bleeding)
|
3. |
After be equipped perform bleeding air procedure in clutch release
cylinder after pouring the brake fluid.
(Refer to Clutch - "Clutch Release Cylinder") - [MT only]
|
Master Cylinder. Removal
Master Cylinder assembly 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the ECM. (Refer ...Brake Line. Components
When installing brake hose, be sure to comply with the torque specification to prevent twisted hose. ...See also:
Front Disc Brake. Removal
Brake caliper assembly
1.
Remove the front wheel & tire.
Tightening torque :
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft ...
Evaporator Temperature Sensor Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove it console side cover (A) by pushing it rearward.
[RH]
...
Road warning
Hazard warning flasher
The hazard warning flasher serves as a warning to other drivers to exercise extreme
caution when approaching, overtaking, or passing your vehicle.
It should be used whenev ...