Kia Soul: Installation - Multifunction Switch - Body Electrical SystemKia Soul: Installation

Kia Soul 2014-2019 PS Service Manual / Body Electrical System / Multifunction Switch / Installation

1.
Install the multifunction switch.
2.
Install the clock spring.
3.
Install the steering column upper and lower shrouds.
4.
Install the steering wheel.
5.
Connect the negative (-) battery terminal.
  
Make sure the multifunction switch connectors are plugged in properly.
    Removal
    1. Disconnect the negative (-) battery terminal. 2. Remove the steering wheel. (Refer to Steering System - "Steer ...

    Inspection
    Lighting Switch Inspection 1. With the multi function switch in each position, make sure that continuity exists between the terminals below. If conti ...

    See also:

    Capacity/weight
    Min : Behind rear seat to upper edge of the seat back. Max : Behind front seat to roof. ...

    Recommended lubricants and capacities
    To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality. The correct lubricants also help promote engine efficiency that results in impro ...

    Battery Removal
    1. Turn the ignition switch OFF and disconnect the battery negative (-) cable (A). 2. Disconnect the positive (+) terminals (B) from the ba ...