Kia Soul: Installation - Clutch Release Fork and Clutch Release Bearing - Clutch SystemKia Soul: Installation

Kia Soul 2014-2019 PS Service Manual / Clutch System / Clutch Release Fork and Clutch Release Bearing / Installation

1.
Install the boot (A).
2.
Install the clip to the clutch release fork.
3.
Apply to grease in location A, B and C.
Location
 Quantity (g)
 Remarks
A
 0.3 ~ 0.5
 Release bearing & Fork
B
 0.5 ~ 1.0
 Release Fork & Fulcrum
C
 0.4 ~ 0.8
 Release cylinder & Fork

4.
Apply the grease to the hole surface of the clutch release bearing all around.
Specified grease: CASMOLY L9508
Amount: 0.5 ~ 1.0 g

5.
Install the clutch release fork (B), clutch release bearing (A).
6.
Install the transaxle assembly.
G 1.6 GDI (Refer to Manual Transaxle System - " Manual Transaxle")
G 2.0 GDI (Refer to Manual Transaxle System - " Manual Transaxle")
    Inspection
    1. Check for damage to boot. 2. Check for deformation to clutch release fork. 3. Check for deformation to clutc ...

    Manual Transaxle System
    ...

    See also:

    Description
    The charging system included a battery, an alternator with a built-in regulator, and the charging indicator light and wire. The Alternator has eight built-in diodes, each rectifying AC curre ...

    Fuel lines, hoses and connections Inspection
    Visually check the fuel lines for cracks, leakage, loose connections, deformation or tank band looseness. ...

    Emission control system
    The emission control system of your vehicle is covered by a written limited warranty. Please see the warranty information contained in the Warranty & Maintenance book in your vehicle. Your veh ...