Kia Soul: Installation - Clutch Tube - Clutch SystemKia Soul: Installation

Kia Soul 2014-2019 PS Service Manual / Clutch System / Clutch Tube / Installation

  
When installing, O-rings of clutch tube should be replaced with a new one.
1.
Install in the reverse order of removal.
2.
After be equipped, perform bleeding air procedure after pouring the brake fluid.
(Refer to Clutch System - "Clutch release cylinder")
    Removal
    1. Remove the air cleaner assembly. G 1.6 GDI (Refer to Engine Mechanical System - "Air Cleaner") G 2.0 GDI (Refer to Engine Mechanical System - " ...

    Clutch Release Cylinder
    ...

    See also:

    Blower Resistor (Manual) Inspection
    1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replac ...

    Ambient Temperature Sensor Description and Operation
    Description The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower te ...

    Air bag collision sensors
    (1) SRS control module (2) Front impact sensors (3) Side impact sensors (4) Side pressure sensor WARNING - Air bag sensors Do not hit or allow any objects to impact the locations where air b ...