Kia Soul: Input Speed Sensor. Removal - Automatic Transaxle Control System - Automatic Transaxle SystemKia Soul: Input Speed Sensor. Removal

Kia Soul 2014-2019 PS Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Input Speed Sensor. Removal

1.
Remove the valve body assembly.
(Refer to Hydraulic System - "Valve Body")
2.
Disconnect the input & output speed sensor connector(A).
3.
Remove the input & output speed sensor (B) after removing the bolts(2ea).

Tightening torque:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

    Input Speed Sensor. Inspection
    1. Check signal waveform of Input & output speed sensor using the GDS. Specification: Refer to "Signal Wave Form" section. ...

    Input Speed Sensor. Installation
    1. Install in the reverse order of removal.    • ...

    See also:

    Hands Free Switch Installation
    1. Install the remote control switch on the steering wheel. 2. Install the steering wheel. 3. ...

    Low aspect ratio tire (if equipped)
    Low aspect ratio tires, whose aspect ratio is lower than 50, are provided for sporty looks. Because the low aspect ratio tires are optimized for handling and braking, it may be more uncomfortable ...

    Front Door Side Weatherstrip Replacement
    1. Loosen the front door checker (B) mounting bolt. Tightening torque : 16.7 ~ 21.6 N.m (1.7 ~ 2.2 kgf.m,12.3 ~ 15.9 lb-ft) ...