Kia Soul: Ignition Coil Removal - Ignition System - Engine Electrical SystemKia Soul: Ignition Coil Removal

Kia Soul 2014-2019 PS Service Manual / Engine Electrical System / Ignition System / Ignition Coil Removal

1.
Disconnect the battery nagative terminal.
2.
Remove the engine cover.
3.
Disconnect the ignition coil connector (A).

  
•
When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).

4.
Remove the ignition coil (A).

    Ignition Coil Installation
    1. Install in the reverse order of removal. Ignition coil installation bolts: 9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 Ib-ft) ...

    See also:

    Smart key function
    1.Door lock 2.Door unlock 3.Tailgate unlock 4.Panic (if equipped) ...

    Overhead Console Lamp Inspection
    1. Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace the map lamp switch. ...

    Knock Sensor (KS). Description and Operation
    Description Knocking is a phenomenon characterized by undesirable vibration and noise and can cause engine damage. Knock Sensor (KS) is installed on the cylinder block and senses engine knoc ...