•
|
Be careful not to damage the hood and body.
|
|
•
|
When removing and installing the hood, an assistant is
necessary.
|
•
|
When removing the clips, use a clip remover.
|
|
1. |
Using a screwdriver, lift the socket clips (A) up slightly on
both ends of the lifter (B).
|
2. |
After loosening the hood hinge (B) mounting bolts, remove the
hood assembly (A).
Tightening torque :
21.6~26.5 N.m (2.2~2.7 kgf.m, 15.9~19.5 lb-ft)
|
|
3. |
Install in the reverse order of removal.
• |
Make sure the hood locks/unlocks and opens/closes
properly.
|
• |
Adjust the hood alignment.
|
|
|
•
When removing and installing the hood lifter, an assistant
is necessary.
...
See also:
Smart key immobilizer system
Your vehicle is equipped with an electronic engine immobilizer system to reduce
the risk of unauthorized vehicle use.
Your immobilizer system is comprised of a small transponder in the smart key
...
Seat Heater Switch Inspection
First Row Seat
1.
Disconnect the negative (-) batttery terminal.
2.
Disconnect the A/C & heater controller connectors ...
Cylinder Block Reassembly
1.
Install in the reverse order of disassembly.
In case the cylinder bloc ...