1. |
Bulb
(1) |
Elements
Xenon gas: Xenon gas activates the initial reaction
for rapid illuminating.
Molybdenum electrode: anode arcing
Metal halide salts: color composing component
|
(2) |
Lightening principle
When Xenon gas and metal halide salt will discharge
the molybdenum anode in a capsule, it emits light.
|
|
2. |
Ignitor
Ignitor (A) is an electromagnetic transformer that receives
current from ballast and boost voltage to light on the arc light
source in any environment.
|
3. |
Ballast
(1) |
Ballast (A) delivers an instant high voltage pulse
to the ignitor electrode, to initialize discharge in the
source.
|
(2) |
Ballast supplies the stable power to the bulb and
the ignitor during initialization and normal state of arc.
|
|
4. |
Stability
(1) |
Durable for vibration as there is no filament.
|
(2) |
Does not operate if polarity are changed.
|
(3) |
Doesn't operate if the input voltage is not in the
range of 10-16V.
|
(4) |
Doesn't operate if the circuit is short.
|
(5) |
Doesn't operate if the bulb burnt out.
|
|
1. Head lamp assembly lens & housing
2. Head lamp low beam bulb
3. Head lamp high beam bulb
4. Turn signal lamp bulb
5. Dust cap (High)
6. Dust cap (L ...
1.
Check-points upon head lamp failure (HID)
(1)
Check the battery voltage. (Low beam will be on when
the battery volt ...
See also:
Power Seat Control Switch Installation
1.
Install the power seat control switch after connecting the
connector.
2.
Install the front seat shield outer cover.
...
Front Door Module Replacement
1.
Remove the front door window glass.
(Refer to Front Door - "Front Door Window Glass")
2.
Remove the front door outside hand ...
Starting the engine
WARNING - Proper footwear
Always wear appropriate shoes when operating your vehicle. Unsuitable shoes
(high heels, ski boots, sandals, etc.) may interfere with your ability to use the
brake and a ...