Kia Soul: Glove Box Housing Replacement - Crash Pad - Body (Interior and Exterior)Kia Soul: Glove Box Housing Replacement

Kia Soul 2014-2019 PS Service Manual / Body (Interior and Exterior) / Crash Pad / Glove Box Housing Replacement

  
•
Put on gloves to protect your hands.
  
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and panels.
1.
Using a screwdriver or remover, remove the crash pad side cover [RH] (A).
2.
Loosen the glove box housing mounting bolts (A).
3.
After loosening the mounting screws, then remove the glove box housing (A) by using a screw driver.
4.
Disconnect the glove box lamp connector (A).
5.
Remove the glove box housing mounting clip (A).

  
•
When installing glove box housing, be sure to insert lock pin (A) into wiring tape (B).

6.
Install in the reverse order of removal.
  
•
Make sure the connector are connected in properly.
•
Replace any damaged clips.
    Glove Box Housing Component Location
    1. Glove box housing ...

    Steering Column Shroud Panel Component Location
    1. Steering column shroud lower panel 2. Steering column shroud upper panel ...

    See also:

    Front fog light (if equipped)
    Fog lights are used to provide improved visibility when visibility is poor due to fog, rain or snow, etc. The fog lights will turn on when the fog light switch (1) is turned to the on position ...

    Crash Pad Side Cover Component Location
    [LH] 1. Crash pad side cover [LH] [RH] 1. Crash pad side cover [RH] ...

    Power Seat Control Switch Removal
    1. Disconnect the negative (-) battery terminal. 2. Remove the front seat shield outer cover. (Refer to Body - "F ...