Kia Soul: Fuel Filler Cap Description
Kia Soul 2014-2019 PS Service Manual / Emission Control System / Evaporative Emission Control System / Fuel Filler Cap Description
A ratchet tightening device on the threaded fuel filler cap reduces the
chances of incorrect installation, which seals the fuel filler. After the gasket
on the fuel filler cap and the filler neck flange contact each other, the ratchet
produces a loud clicking noise indicating the seal has been set.
| 1. Cover 2. Torsion spring 3. Retainer 4. Gasket seal |
5. Spring 6. Plate seal 7. Vacuum valve 8. Spring |
On-board Refueling Vapor Recovery (ORVR) valve Installation
1.
Install in the reverse order of removal.
...
Fuel Tank Air Filter Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Lift the vehicle.
3.
Dis ...
See also:
If the engine will not start
If engine doesn't turn over or turns over slowly
1. If your car has an automatic transaxle, be sure the shift lever is in N (Neutral)
or P (Park) and the emergency brake is set.
2. Check the b ...
Repair procedures
Fuel Pressure Test (Low pressure system)
1.
Release the residual pressure in fuel line (Refer to the Fuel Delivery System - Repair Procedu ...
Power Door Mirror Actuator Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door quadrant cover (A).
...