Kia Soul: Front Wheel Speed Sensor. Removal - ESC(Electronic Stability Control) System - Brake SystemKia Soul: Front Wheel Speed Sensor. Removal

Kia Soul 2014-2019 PS Service Manual / Brake System / ESC(Electronic Stability Control) System / Front Wheel Speed Sensor. Removal

1.
Remove the front wheel & tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
2.
Remove the front wheel speed sensor mounting bolt (A).
Tightening torque:
6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)

3.
Disconnect the front wheel speed sensor connector (A).
4.
Loosen the mounting bolt (A) and then remove the front wheel speed sensor.
Tightening torque :
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

5.
Install in the reverse order of removal.
    Front Wheel Speed Sensor. Components
    1. Front wheel speed sensor 2. Front wheel speed sensor connector ...

    Rear Wheel Speed Sensor. Components
    1. Rear wheel speed sensor 2. Extension cable assembly ...

    See also:

    Compressor oil Specification
    1. The R-134a system requires synthetic (PAG) compressor oil whereas the R-12 system requires mineral compressor oil. The two oils must never be mixed. ...

    Component Location
    1. Horn switch 2. Horn relay (EMS box) 3. Horn 4. Clock spring ※ Horn relay is built in EMS box. ...

    Input Speed Sensor. Installation
    1. Install in the reverse order of removal.    • ...