•
|
Put on gloves to protect your hands.
|
|
•
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
•
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
•
|
Take care not to bend or scratch the trim and panels.
|
|
1. |
Remove the front seat back cover.
(Refer to Front Seat - "Front Seat Back Cover")
|
2. |
Remove the front seat cushion cover.
(Refer to Front Seat - "Front Seat Cushion Cover")
|
3. |
Disconnect the connector (A).
|
4. |
After loosening the mounting bolts, then disconnect the front
seat back frame assembly (B) and front seat cushion frame assembly (C).
Tightening torque :
44.1 ~ 53.9 N.m (4.5 ~ 5.5 kgf.m, 32.5 ~ 39.8 lb-ft)
|
|
5. |
Install in the reverse order of removal.
• |
Remove the side air bag for replacing side air
bag installation seat.
(Refer to Restraint - "Side Airbag (SAB) Module")
|
• |
Before service, be fully aware of precautions
and service procedure relevant to air bag.
(Refer to Restraint - "Side Airbag (SAB) Module")
|
|
|
1. Front seat back frame assembly
2. Front seat cushion frame assembly
...
See also:
Failure Diagnosis
1.
In principle, ESC and TCS controls are prohibited in case of ABS
failure.
2.
When ESC or TCS fails, only the failed system control is pr ...
ESC OFF usage
When driving
It’s a good idea to keep the ESC turned on for daily driving whenever possible.
To turn ESC off while driving, press the ESC OFF button while driving on
a flat road surface.
...
Mood Lamp Installation
[Mood Lamp Unit]
1.
Install the mood lamp unit.
2.
Install the audio head unit.
3.
...