| •
|
Put on gloves to protect your hands.
|
|
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
| •
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
| •
|
Take care not to bend or scratch the trim and panels.
|
|
|
1. |
Remove the front pillar trim.
|
(1) |
To remove the front pillar trim, the below tool (A) must
be used.
|
|
(2) |
Slightly spread open the front pillar trim and then place
the tool (A) on the mounting clip (B) like the picture below.
After placing the tool (A) on the mounting clip (B) push
it to the front.
|
• |
Once the front pillar trim has been removed,
replace the clips to new ones.
|
|
|
|
(3) |
Remove the front pillar trim (A).
| A. |
Front Pillar Trim Mounting Method
|
|
• |
Remove the mounting clip (A) by turning
it clockwise.
|
|
|
|
|
2. |
Install in the reverse order of removal.
|
• |
Replace any damaged clips.
|
|
|
1. Center pillar lower trim
2. Center pillar upper trim
...
See also:
Removal
1.
Remove the mirror wiring cover (A).
2.
Disconnect the ECM mirror connector (B).
3.
...
Cylinder Block Inspection
1.
Using a gasket scraper, remove all the gasket material from the
top surface of the cylinder block.
2.
Using a soft brush and solvent, th ...
Telemetics Unit (TMU) Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the glove box housing.
(Refer to Body - "Glove Box Hou ...
Kia Soul: Front Pillar Trim Replacement
Front Pillar Trim Component Location
Center Pillar Trim Component Location