1. |
Install the hub bearing to the knuckle assembly.
(1) |
Lay the knuckle assembly (A) on press.
|
(2) |
Lay a new hub bearing upon the knuckle assembly (A).
|
(3) |
Lay a suitable adapter (B) upon the hub bearing.
|
(4) |
Install the hub bearing to the knuckle assembly by using
press.
|
- |
Do not press against the inner race of the hub
bearing because that can cause damage to the bearing
assembly.
|
- |
Always use a new wheel bearing assembly.
|
|
|
2. |
Install the hub assembly to the knuckle assembly.
(1) |
Lay the hub assembly (A) upon a suitable adapter .
|
(2) |
Lay the knuckle assembly (B) upon the hub assembly (A).
|
(3) |
Lay a suitable adapter (C) upon the hub bearing.
|
(4) |
Install the hub assembly (A) to the knuckle assembly (B)
by using press.
|
Do not press against the inner race of the hub bearing
because that can cause damage to the bearing assembly.
|
|
3. |
Install the snap ring (A).
|
1.
Remove the snap ring (A).
2.
Remove the hub assembly from the knuckle assembly.
(1)
Install the ...
1.
Check the hub for cracks and the splines for wear.
2.
Check the brake disc for scoring and damage.
3.
C ...
See also:
Power Seat Motor Inspection
Power Seat Motor
1.
Disconnect the connectors for each motor.
(Refer to Body - "Front Seat Assembly")
A : Slide motor
B : Fro ...
Speakers Inspection
1.
Troubleshooting for Speaker
(1)
Basic inspection of speaker
Inspect the sound from speaker after verifying that the
s ...
Front seat adjustment - power (if equipped)
The front seat can be adjusted by using the control switches located on the outside
of the seat cushion.
Before driving, adjust the seat to the proper position so you can easily control
the steer ...