Kia Soul: Front Body
Front Body A
| * These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ] |
Front Body B
| * These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ] |
Front Body C
| * These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ] |
Front Body D
| * These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ] |
|
|
|
|
| Hood hinge mounting hole (Ø11) |
Fender apron upper panel tooling hole (Ø6.6) |
Fender apron upper panel tooling hole (Ø6.6) |
|
|
|
|
| Fender apron member tooling hole (Ø6) |
Front shock absorber mounting hole (Ø15) |
Cowl panel tooling hole (Ø6.6) |
|
|
|
|
| Side outer panel corner |
Side outer panel corner |
Engine mounting bracket hole (Ø12) |
|
|
|
|
| Transaxle mounting hole (Ø12) |
Engine mounting bracket hole (Ø12) |
Transaxle mounting hole (Ø13) |
|
|
|
|
| Front side member tooling hole (Ø8.8) |
Front side member tooling hole (Ø6.6) |
Front end module mounting hole (Ø11) |
Body Dimensions
...
Side Body
Side Body A
* These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ]
Side Body B
* These dimensions indicated in this ...
See also:
Front Washer Motor Installation
1.
Reassemble the washer reservoir.
Tightening torque:
6.9 ~ 10.8Nm (0.7 ~ 1.1, kgf.m, 5.0 ~ 7.9 lb-ft)
...
Trouble Symptom Charts
Trouble Symptom 1
Trouble Symptom 2
Trouble symptom
Probable cause
Remedy
The set vehicle speed varies greatly upward or
downward
"Su ...
Curtain Airbag (CAB) Module. Removal
1.
Disconnect the battery negative cable and wait for at least thirty
seconds before beginning work.
2.
Remove the roof trim assembly.
...