Kia Soul: Exhaust Manifold Removal and Installation - Intake And Exhaust System - Engine Mechanical SystemKia Soul: Exhaust Manifold Removal and Installation

Kia Soul 2014-2019 PS Service Manual / Engine Mechanical System / Intake And Exhaust System / Exhaust Manifold Removal and Installation

1.
Remove the engine cover.
2.
Disconnect the battery negative terminal.
3.
Disconnect the front and rear oxygen sensor connectors (A).
4.
Remove the front muffler.
(Refer to Intake And Exhaust System - "Muffler")
5.
Remove the heat protector (A).
Tightening torque:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

6.
Remove the exhaust manifold stay (A).
Tightening torque:
39.2 ~ 49.0N.m (4.0 ~ 5.0kgf.m, 28.9 ~ 36.2lb-ft)

7.
Remove the exhaust manifold (A) and gasket.
Tightening torque:
29.4 ~ 41.2N.m (3.0 ~ 4.2kgf.m, 21.7 ~ 30.4lb-ft)

  
When installing, replace with a new gasket.
When installing the intake manifold, tighten the nuts with pre-torque first, and then tighten the nuts with specified torque in the sequence shown.

8.
Install in the reverse order of removal.
    Exhaust Manifold Components
    1. Heat protector 2. Exhaust manifold 3. Gasket 4. Exhaust manifold stay ...

    Muffler Components
    1. Front muffler 2. Catalytic converter & center muffler assembly 3. Main muffler 4. Gasket 5. Hanger ...

    See also:

    Relay Box (Passenger Compartment) Description
    Smart Junction Box(SJB) 1. General function : Interior Junction Box + some functions of BCM It controls loads with CAN communication and IPS. ...

    Vehicle weight
    This section will guide you in the proper loading of your vehicle and/or trailer, to keep your loaded vehicle weight within its design rating capability, with or without a trailer. Properly loadin ...

    Main Crash Pad Assembly Replacement
       • Put on gloves to protect your hands. ...