Kia Soul: Drive Belt Installation - Timing System - Engine Mechanical SystemKia Soul: Drive Belt Installation

Kia Soul 2014-2019 PS Service Manual / Engine Mechanical System / Timing System / Drive Belt Installation

1.
Install the drive belt (A).
2.
Adjust tension by tightening the alternator tension adjust bolt (B) and then install the mounting bilts(A).
Tightening torque
12mm (0.47in) bolt :
19.6 ~ 26.5 N.m (2.0 ~ 2.7 kgf.m, 14.5 ~ 19.5 Ib-ft)
14mm (0.55in) bolt :
29.4 ~ 41.2 N.m (3.0 ~ 4.2 kgf.m, 21.7 ~ 30.4 Ib-ft)

3.
Connect the battery negative terminal.
    Drive Belt Adjustment
    Drive belt tension measurement and adjustment Belt tension measurement Measure the belt tension using a mechanical tension gauge or a sonic tension meter. Tensi ...

    Idler Components
    1. Idler ...

    See also:

    Parking brake
    Checking the parking brake Check the stroke of the parking brake by counting the number of “clicks’’ heard while fully applying it from the released position. Also, the parking brake alon ...

    Windshield Deicer Switch Installation
    1. Install the heater and A/C control unit. 2. Connect the negative (-) battery terminal. ...

    Crankshaft Position Sensor (CKPS). Repair procedures
    Inspection 1. Check signal waveform of CKPS and CMPS using a GDS. Specification: Refer to “Waveform” Removal ...