Kia Soul: Cylinder Head Cover Installation - Cylinder Head Assembly - Engine Mechanical SystemKia Soul: Cylinder Head Cover Installation

Kia Soul 2014-2019 PS Service Manual / Engine Mechanical System / Cylinder Head Assembly / Cylinder Head Cover Installation

1.
Install the cylinder head cover (A) with a new gasket (B).

  
Do not reuse the disassembled gasket.
2.
Tighten the cylinder head cover bolts (A) with the order and steps.
Tightening torque :
1st step: 3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
2nd step: 7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb-ft)

3.
Install the other parts in reverse order of removal.
    Cylinder Head Cover Removal
    1. Remove the engine cover. 2. Disconnect the battery negative terminal. 3. Disconnect the control wiring harne ...

    CVVT & Camshaft Components
    1. Exhaust camshaft 2. Intake camshaft 3. Exhaust CVVT 4. Intake CVVT 5. Camshaft bearing cap 6. Camshaft front bearing cap 7. O-ring 8. OCV (Oil Control Valve) a ...

    See also:

    Reducing the risk of a rollover
    This multi-purpose passenger vehicle is defined as a Crossover Utility Vehicle (CUV). CUV’s have higher ground clearance and a narrower track to make them capable of performing in a wide variety ...

    Transaxle Oil Temperature Sensor. Circuit Diagram
    ...

    Compession Pressure Inspection
       If the there is lack of power, excessive oil consumption or poor fuel economy, measure the compression pressure. ...