Kia Soul: Cruise Control Switch Inspection - Cruise Control System - Engine Electrical SystemKia Soul: Cruise Control Switch Inspection

Kia Soul 2014-2019 PS Service Manual / Engine Electrical System / Cruise Control System / Cruise Control Switch Inspection

[Measuring Resistance]
1.
Disconnect the cruise control switch connector from the control switch.
2.
Measure resistance between terminals on the control switch when each function switch is ON (switch is depressed).
Function switch
 Terminal
 Resistance
[kΩ ± 5%]
CANCEL
 2 - 4
 0.18
SET–
 2 - 4
 0.33
RES+
 2 - 4
 0.55
CRUISE
 2 - 4
 0.88

3.
If not within specification, replace switch.
[Measuring Voltage]
1.
Connect the cruise control switch connector to the control switch.
2.
Measure voltage between terminals on the harness side connector when each function switch is ON (switch is depressed).
Function switch
 Terminal
 Voltage (V)
CANCEL
 2 - 4
 0.63 ~ 0.97
SET–
 2 - 4
 1.03 ~ 1.37
RES+
 2 - 4
 1.58 ~ 2.02
CRUISE
 2 - 4
 2.08 ~ 2.52

3.
If not within specification, replace switch.
    Cruise Control Switch Circuit Diagram
    ...

    Cruise Control Switch Removal
    1. Disconnect the negative (-) battery terminal. 2. Remove the driver airbag module. (Refer to the RT group) 3. ...

    See also:

    ISG system malfunction
    The system may not operate when: If the ISG related sensors or system error occurs, the yellow AUTO STOP indicator () on the instrument cluster will stay on after blinking for 5 seconds and t ...

    Side Impact Sensor (SIS). Components
    ...

    Drive shafts and boots
    Check the drive shafts, boots and clamps for cracks, deterioration, or damage. Replace any damaged parts and, if necessary, repack the grease. ...