| •
|
Put on gloves to protect your hands.
|
|
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
| •
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
| •
|
Take care not to bend or scratch the trim and panels.
|
|
|
1. |
Remove the cowl side trim.
(Refer to Interior Trim - "Cowl Side Trim")
|
|
2. |
Using a screwdriver or remover, remove the crash pad side cover
[LH] (A).
|
|
3. |
After loosening the mounting screws, then remove the crash pad
lower panel (A) by using a screw driver.
|
|
4. |
Disconnect the diagnosis connector (A).
|
|
5. |
Install in the reverse order of removal.
|
• |
Make sure the connector are connected in properly.
|
|
• |
Replace any damaged clips.
|
|
|
1. Crash pad lower panel
...
See also:
Front Strut Assembly Components
1. Strut assembly
2. Insulator
3. Strut bearing
4. Spring upper pad
5. Coil spring
6. Dust cover
7. Bumper rubber
8. Spring lower pad
...
Shopping bag holder
Do not hang a bag weighing more than 7 lbs. (3 kg). It may cause damage to the
shopping bag holder. ...
Engine coolant
The high-pressure cooling system has a reservoir filled with year round antifreeze
coolant. The reservoir is filled at the factory.
Check the antifreeze protection and coolant level at least once a ...
Kia Soul: Crash Pad Lower Panel Replacement
Crash Pad Lower Panel Component Location
Glove Box Housing Component Location